In a dynamic and constantly changing market, the creation of a production and storage facility for pastries in Montbert represents a strategic opportunity to meet the increasing demand from customers. The company GH-Girard Hervouet, a Dlubal customer, was responsible for the steel frame, cladding, roofing, and locks, among other things.
A particularly exciting customer project is the high-speed toll station by Jiangsu Jingong Space Structure Co., Ltd. In this project, a membrane is supported by an innovative arch truss, which has an interesting appearance and also special properties.
The rack has a height of 13 m (43 ft), a width of 14 m (46 ft), and a length of 120 m (394 ft). Cross struts are attached vertically every 14 m (46 ft) to ensure transverse bracing.
The transition to more sustainable energy sources is a global priority today. In this sense, the construction of a multi-energy station in Les Sables-d'Olonne, in the Vendée department (85), is an innovative and promising project. This station, consisting of three canopies with a height of 7.5 m (24.5 ft) and a total length of 40 m (131 ft), represents a significant investment to promote low-carbon mobility and local green energy. GH Hervouet, a customer of Dlubal Software, was responsible for the entire project, including carpentry, roofing and cladding.
The four-story office building welcomes visitors, members, and employees of the AmperVerband company in its modern premises. The entrance area of the partially glazed facade includes inclined, V‑shaped composite steel columns spanning two floors.
As part of the urban development of Metz, a new gymnasium is under construction, featuring advanced engineering techniques and a commitment to sustainability. The project combines LC spruce GL24h cross-beams, steel columns, and insulated concrete precast walls to ensure the stability of the structure. The timber roof structure serves as a support for the photovoltaic panels. BET Moselle Bois, a customer of Dlubal Software, was responsible for the structural analysis and design.
Engineer Enrique de León, a Guatemalan Dlubal Software customer, presents a beautiful steel pergola project by which a rarely used space has been renovated in the 'L' building of the San Francisco de Borja SJ campus at the Rafael Landívar University in Guatemala City.
This project deals with structural evaluation against climatic loads and the utilization and seismic analysis of an existing telecommunications tower performed by SAQQARA INGENIERIA S.L., a customer of Dlubal Software. The structure is a lattice tower with a square section plan, made of steel cross-sections, with a radar and the necessary auxiliary equipment installed on it, including a spherical radome as a mimicry.
In June 2023, a roof of the amphitheater of the Municipal Theater in Most was successfully completed. The membrane structure has been specially designed to provide protection from the sun and rain above the stage, while making the entire space a visual attraction. The author of the design is Carl Stahl & spol.; the calculation was carried out using the programs RFEM 5 and RWIND 2.
At the end of April 2023, a new aviary was completed at the Sichuan Pavilion in the Prague Zoo. The aviary structure has a length of 14 m and a width of 10 m. The company Carl Stahl & spol. created the architectural and structural design, calculated in RFEM 5.
A distinctive entry point gantry structure welcomes motorsport enthusiasts of The Motor Enclaves at Tampa, Florida. The gantry structure is made of two 40-foot-high cube containers and steel frames.
A new User Experience Center has been added to the well-known NeoPark in Hefei, China. Like the NIO logo, the structure's upper half symbolizes the sky and the lower half the earth – a really beautiful building.
Quai M, which is the name of the new concert hall, opened in September 2022 and includes two halls for concerts as well as rehearsal and recording rooms. The project replaces the city's old "Fuzz'Yon" concert room, providing a new and modern space for music.
In Münster, a pedestrian and cycle bridge must be replaced. What is special here is the elegant structure spanning the Dortmund-Ems Canal in a smooth arc. A very interesting structure!
The King Louis Bridge is listed as a heritage building; built in 1852, with a length of about 403 ft, it is an outstanding example of civil engineering in Germany. Since 1986, the former railroad bridge, made of timber and steel, has been used as a pedestrian and cyclist bridge across the more than 98-ft-deep river incision in the Iller River.
The Airedale swing bridge is the largest manually operated steel swing bridge in the UK. It provides access to a newly built housing development on the outskirts of Leeds.
The successful general redevelopment of AQUAtherm has been providing year-round swimming pleasure in Straubing since 2021. The structure of the indoor swimming pool is something very special.
As part of the renovation and reconstruction of the sports area at a multi-purpose city high school in the north of Mayotte, an overseas department of France, a roofing was built as a steel-textile structure to protect the area from bad weather and the sun.
This project aims to rehabilitate, extend, and enhance the former Haras ice rink, located near the Château d'Angers, a castle in the city of Angers, belonging to the ABF sector (Architectes des Bâtiments de France). The aim is to create a modern sports facility that meets the needs of the local community while preserving the existing architectural heritage.
After its creation in 2022, the second edition of the Festival des Cabanes at the Villa Medici in Rome takes place from May 24 to October 1, 2023. Throughout the summer, it offers architects, artists, and people interested in art and culture the opportunity to visit the exhibition in the historic gardens of the Villa Medici. One of the seven cabin projects has benefited from the intervention of Atelier PoCo, a French customer of Dlubal Software, for its design and technical study.
The existing Freischütz pedestrian and cyclist bridge was renewed as part of the 4-lane widening of federal highway 236 between Dortmund/Schwerte and the Schwerte motorway junction of the Autobahn 1 highway.
In Cologne, a new exhibition greenhouse and an orangery are going to enrich the Flora botanical garden. The exhibition greenhouse consists of three arched building sections that are connected to each other.
The Jewish community center, including a synagogue, is an all-round successful structure, fitting seamlessly into the cityscape of Regensburg, Germany. The connection of a community center in the northern part and a synagogue with a spherical dome in the southern part is something very special.
SIDO Madera, a Spanish Dlubal customer, has designed a 21-meter-long (69 ft) bicycle-pedestrian bridge located in Orihuela, Alicante, Spain. It is made of GL24H pine timber, treated by autoclave with copper salts. In addition, hot-dip galvanized S235 steel fasteners were used.
A developer project of 121 apartments in 2 identical buildings for rent with an area of 53,820 ft² each, designed by CIP ARQUITECTOS SL, was built by the construction company ACR in just 13 months of construction, including earthworks, foundations, and basement, using the industrialized Steel Framing system by AFCA Teccon, a customer of Dlubal Software.
In 2022, the event area of the breathtaking "Harzdrenalin" attraction was given an elegant canvas roof made of three membranes. This lightweight structure is intended to protect visitors from sun and rain.
The Museum of Contemporary Art & Planning Exhibition (MOCAPE) in Shenzhen consists of two parts that are independent and organically unified. Two venues are combined in one building: the Museum of Contemporary Art (MOCA), and the Planning Exhibition (PE).
At Metalúrgica Vera SRL, a metalworking company in Paraguay, metal structures are manufactured and assembled for various projects. One such project is the Velodrome, a sports facility prepared for cycling competitions.